Wednesday, June 4, 2014

Repair my Range Stove Oven Surface Burner Terminal Block Kit Replacement

This particular Surface Burner Terminal Block Kit is specific to GE manufactured brands including General Electric, Hotpoint, and Kenmore. Search Your parts Here 



VIDEO BY PartSelect
If your range is having any of these problem, then replacing the surface burner terminal could solve your appliance problem. Burner will not heat up

Get model-specific repair help from PartSelect.com. Learn how to troubleshoot, diagnose and repair your appliance with user-generated installation instructions, hundreds of step-by-step repair videos, and our Instant Repairman. If you've got an appliance problem, we can help 

Tuesday, June 3, 2014

GE Range Stove Oven Repair - Replacing the Surface Burner Switch - 8" - 2500W (GE Part WB24T10025)

Stove Range Oven Repair In New York City

This particular surface burner switch is specific to GE manufactured brands including General Electric, Hotpoint, and Kenmore. To find a surface burner switch specific to your model


video by PartSelect

If your oven/range/stove is having any of these symptoms, then replacing the surface burner switch could solve your appliance problem.
Appliance Repair Service click HERE

If you've got an appliance problem, we can help 

 

Stove Range Oven Repair service

Phone: 718-787-1301
http://www.armanfix.com/


Friday, May 30, 2014

GE Oven/Stove/Range Hinge with Roller - Left Side Replacement

If your oven/stove/range is having any of these symptoms, then replacing the hinge roller could solve your appliance problem.
1) Oven Door will not open and/or close
Tools used for this repair/replacement:
1) Phillips Screw Driver
2) Pliers
GE Part Number: WB14X103
 

 
video by PartSelect 

Phone: 718-787-1301
http://www.armanfix.com/

Wednesday, May 21, 2014

Temperatures Washing Machine Water for Better Performance

lothes not coming out clean? The water might be too cold. Make sure your cold washing machine water is at least 65-degrees for best detergent action.

Water coming from the cold water tap can be pretty chilly during the winter (or year-round if you have a well). According to washing machine manufacturers, if the water is colder than 65 degrees F, the additives in laundry detergent won't work as well—and powder detergents won't fully dissolve. Cold water for washing should be in the 65- to 85-degree range or clothes won't get completely clean.
To find out if your clothes are getting a good wash, check the water temperature with a cooking thermometer (one that registers low temperatures) when you do a cold, a warm and a hot wash. If the water temperature is below 65 degrees for cold water washes, boost it by selecting warm water for part of the initial fill cycle. If the warm water wash is below 85 degrees (a common problem during winter or when the washing machine is at the opposite end of the house from the water heater), try the hot water setting instead for all or part of the wash cycle. Or run the hot water tap into the laundry tub until it gets hot, then turn on the washer.
Always leave rinse settings on cold, no matter what washing temperature you choose. Cold water rinses are just as effective as warm water rinses, and you'll save a lot of energy.

The Microwave Oven Cooks Slowly or Unevenly ARmanfix
http://www.armanfix.com/book-appointment.html
Phone: 718-787-1301
http://www.armanfix.com/

Saturday, May 10, 2014

Clean a Washing Machine Inlet Screen - How we can do it

Clean a Washing Machine Inlet Screen - How we can do it
http://www.armanfix.com/book-appointment.html 
Phone: 718-787-1301
 http://www.armanfix.com/

A washing machine that takes forever to fill may have an inlet screen clogged with mineral deposits and tiny particles of debris. The fix is simple.


Turn off the hot and cold water supplies and disconnect the hoses. Use a pair of needle-nose pliers to gently remove the screens for cleaning.
Screens protect the washer's internal parts from grit and debris.
&
Work the clean screen back into the inlet by pressing around the rim of the screen with a small screwdriver. Reconnect the hoses, turn on the water and check for leaks.


Check your washer supply hoses, too. Some contain screens that can be removed and cleaned just like inlet screens.




Cleaning the screens is asimple job. The only tricky part is removing the screens without wrecking them (Photo 1). Don't just yank them out. Gently squeeze and twist as you pull. You'll distort the screens a little, but you can mold them back into shape with your fingers. If your screens are cemented in place by mineral deposits, you may not be able to remove them without damage. New screens are inexpensive, and are sold at appliance parts stores. Clean the screens with running water or blow out debris with an air compressor.
You may have to pick and scrape away stubborn particles with a utility knife.

For Repair Appliance in New York : Click Here


Post by:  By the DIY experts of The Family Handyman Magazine

Friday, May 9, 2014

How To repair Dryer Vent Cover and replace a leaky vent

The Microwave Oven Cooks Slowly or Unevenly ARmanfix
http://www.armanfix.com/book-appointment.html
Phone: 718-787-1301
http://www.armanfix.com/
 
Clothes dryer vents by cleaning and lubricating the vent flaps so they completely close. If unsuccessful, replace the vent, a simple task.

If cold air comes into your laundry room through the dryer vent, you should be able to stop it fairly easily. The vent should have a flap (or flaps) at the end to stop air infiltration. Go outside and make sure there’s a flap and that it’s not stuck open. If the flap works well, check the caulking. If it’s cracking and peeling away, it’s probably allowing cold air to leak in. Cut away the old caulking, make sure the vent is flush against the siding, and apply new latex caulk. If the flap doesn’t close on its own, try cleaning it and then spray silicone on the pivot point. If the flap still won’t close, replace it. A new vent costs about $5 at home centers, and installing it will only take about 15 minutes. Start by cutting away the caulking around the vent on the siding with a utility knife, remove any screws and unclamp the duct leading to the dryer. Slide the old vent out of the wall, slip in the new one and reattach it to the duct. Caulk around the vent flange
post by By the DIY experts of The Family Handyman Magazine
For more information about repair your washer and dryer please visit
http://armanfix.com/
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
We Do Television Repair 

Wednesday, May 7, 2014

Microwave Oven How to fix problem and Replace few parts Troubleshooting

 The Microwave Oven Cooks Slowly or Unevenly ARmanfix
http://www.armanfix.com/book-appointment.html
Phone: 718-787-1301
http://www.armanfix.com/  

Look no further than this video for a detailed, easy to understand, step by step troubleshooting guide to repair your faulty microwave. Over the years, I have repaired many microwave ovens, and the test procedures outlined in this video are exactly what I use.





If you have any questions, please post them in the comments section. I will try my best to reply back as soon as possible.
Thank You!
video by electronicsNmore